Authorized Sales & Service Center   
 
 

Home
Up


 

 
 

Diode S and PID accessories   
Part NumberDescriptionIllustration not to scale
101.291DIODE <S> 120V/1600W - Hot air pistol - with push fit barrel (also available in 230V) 

 

101.311DIODE PID 120V/1600W - Hot air pistol - with push fit barrel (also available in 230V)
101.291 DIODE <S> 120V/1600W - Hot air pistol - with screw on barrel (also available in 230V)
101.292DIODE PID 120V/1600W - Hot air pistol - with screw on barrel (also available in 230V)
101.447 DIODE <S> With MINOR BLOWER, 120V/1700W, 1.5M HOSE, W/USA PLUG (push fit nozzle) also available in 230V and PID 

 

100.303Tubular nozzle ø 5mm push-fit - Standard "pencil" tip nozzle - push fit speed welding nozzle fit onto this nozzle
105.578Tubular nozzle ø 5mm push-fit - Reinforced  "pencil" tip nozzle - push fit speed welding nozzle fit onto this nozzle
107.123Wide slot nozzle ø 20mm, push-fit - detail overlap nozzle - used between two thermoplastic sheets of material
107.124Angled nozzle 20mm, 90° push-fit - custom detail overlap nozzle - used between two thermoplastic sheets of material

107.125Angled nozzle 20mm, 60° push-fit custom detail overlap nozzle - used between two thermoplastic sheets of material

107.129Wide slot nozzle 60mm push-fit custom detail overlap nozzle - used between two thermoplastic sheets of material - typically used on Modified Bitumen roofing materials
107.130Wide slot nozzle 40mm, 60° bent push-fit custom detail overlap nozzle - used between two thermoplastic sheets of material
107.131Wide slot nozzle 80mm push-fit custom detail overlap nozzle - used between two thermoplastic sheets of material - typically used on Modified Bitumen roofing materials
107.132Wide slot nozzle 40mm push-fit - overlap nozzle - used between two thermoplastic sheets of material (our most popular nozzle)
107.133Wide slot nozzle 40mm, perforated push-fit overlap nozzle - used between two thermoplastic sheets of material - the perforated vents help to pre-heat the sheet for easier overlap welding
113.666 (3mm)

113.399(4mm)

High speed draw nozzle ø 3mm with tacking tip. Screw on (without tacking tip on request)

High speed draw nozzle ø 4mm with tacking tip. Screw on (without tacking tip on request)

This nozzle requires a screw-on nozzle fitting for the hot air tool that it will be attached to.
113.670

 

106.986

High speed draw nozzle 90-5.7mm with tacking tip. (without tacking tip on request)

 

High speed draw nozzle 7mm screw on


This nozzle requires a screw-on nozzle fitting for the hot air tool that it will be attached to.
106.988Tacking nozzle screw on
This nozzle requires a screw-on nozzle fitting for the hot air tool that it will be attached to.
105.622Tubular nozzle ø 5mm screw on
This nozzle requires a screw-on nozzle fitting for the hot air tool that it will be attached to.
106.989

106.990

106.991

Speed welding nozzle 3mm push-fit on tubular nozzle ø 5mm

Speed welding nozzle 4mm push-fit on tubular nozzle ø 5mm

Speed welding nozzle 5mm push-fit on tubular nozzle ø 5mm
106.992

106.993

Speed welding nozzle 5.7mm push-fit on tubular nozzle ø 5mm

Speed welding nozzle 7mm push-fit on tubular nozzle ø 5mm
106.996 

Tacking nozzle push-fit on tubular nozzle ø 5mm

 


Push fits onto any 5mm round nozzle
107.307 

Spoon reflector 27 ´ 35mm push-fit on Triac PID/Triac S

 

107.326Shell reflector 25 ´ 150mm push-fit on Triac PID/Triac S 

 

107.339Soldering reflector 17 ´ 34mm push-fit on Triac PID/Triac S
107.338Sieve reflector 35 ´ 20mm push-fit on Triac PID/Triac S 

 

107.337Sieve reflector 50 ´ 35mm push-fit on Triac PID/Triac S 

 

107.344Welding mirror 135mm push-fit on Triac PID/Triac S and Diode PID/Diode S 

 

103.430Robust Blower 3x230V
108.623Capacitor 12uF / 240V complete - Used to convert a 3 phase Robust blower to single phase  

 

107.354Stainless Steel Filter for the Robust Blower 

 

101.681Air Hose 14mm 
107.281Hose coupling (ø 38mm) 3 outlet

 

Click here to join our newsletter

MARK YOUR
CALENDARS
for these special events!



WSRCA Trade Show
See the new Varimat V2 in the following booths
Booth #'s 603, 605, 607, 609, Island C, Island J

Paris-Las Vegas Hotel & Casino
June 20-23


Booth #TBA
SGIA
Las Vegas Conv. Center
October 13-15 2010



Booth #TBA
Pack Expo 2010

Chicago IL
October 31- November 3 2010

 

 

 

 

TOP | HOME  | BACK
 

Link to LEISTER Industrial Heat Sources and Blowers

Copyright © 1996 - 2010 Assembly Supplies, Co. 1250 Pacific Oaks Place #104 Escondido, CA  92029
Tel (800) 694-1472 - Fax (888) 694-4275
For questions or comments e-mail us: info@hotairtools.com
 
Equipment manufactured in Switzerland by
LEISTER Process Technologies
Galileostrasse 10 - 6056 Kaegiswil - Switzerland
Tel. +41-41-660 00 77 Fax +41-41-660 78 16
e-mail: Leister@leister.com, or visit their site on the web: http://www.leister.com

Last modified: 04/15/10