Screw on nozzles for the Welding Pen can also be used on the
Diode and Triac if they are equipped with the proper nozzle barrel.
| Part # |
Description |
Illustration (not to scale) |
| 103.430 |
Robust Blower 3x230V |
 |
| 108.623 |
Capacitor 12uF / 240V complete - Used to convert a 3 phase
Robust blower to single phase |
|
| 107.354 |
Stainless Steel Filter for the Robust Blower |
|
| 101.681 |
Air Hose 14mm |
|
| 107.281 |
Hose coupling (ø 38mm) 3 outlet |
 |
| 113.666 (3mm)
113.399(4mm) |
High speed draw nozzle ø 3mm with tacking
tip. Screw on (without tacking tip on
request)
High speed draw nozzle ø 4mm with tacking tip. Screw on (without tacking tip on
request)
|
This nozzle requires a screw-on nozzle fitting for the hot air tool
that it will be attached to. |
| 113.670
106.986 |
High speed draw nozzle 90-5.7mm with tacking
tip. Screw on (without tacking tip
on request)
High speed draw nozzle 7mm screw on
|
This nozzle requires a screw-on nozzle fitting for the hot air tool
that it will be attached to. |
| 106.988 |
Tacking nozzle screw on |
This nozzle requires a screw-on nozzle fitting for the hot air tool
that it will be attached to. |
| 105.622 |
Tubular nozzle ø 5mm screw |
This nozzle requires a screw-on nozzle fitting for the hot air tool
that it will be attached to. |
| 106.989
106.990
106.991 |
Speed welding nozzle 3mm push-fit on
tubular nozzle ø 5mm
Speed welding nozzle 4mm push-fit on tubular nozzle ø 5mm
Speed welding nozzle 5mm push-fit on tubular nozzle ø 5mm |
 |
| 106.992
106.993 |
Speed welding nozzle 5.7mm push-fit
on tubular nozzle ø 5mm
Speed welding nozzle 7mm push-fit on tubular nozzle ø 5mm |
 |
| 106.996 |
Tacking nozzle push-fit on tubular nozzle ø
5mm
|
Push fits onto any 5mm round nozzle |
