Overlap Welding

Diode welding pistol - Light weight and powerful

The Diode with Minor blower makes an excellent combination for your plastic welding application.

Part #	Description	Illustration not to scale
101.291	DIODE <S> 120V/1600W - Hot air pistol - with push fit barrel (also available in 230V)
101.291	DIODE <S> 120V/1600W - Hot air pistol - with screw on barrel (also available in 230V)
101.447	DIODE <S> With MINOR BLOWER, 120V/1700W, 1.5M HOSE, W/USA PLUG (push fit nozzle)
107.123	Wide slot nozzle ø 20mm, push-fit - detail overlap nozzle - used between two thermoplastic sheets of material
107.124	Angled nozzle 20mm, 90° push-fit - custom detail overlap nozzle - used between two thermoplastic sheets of material
107.125	Angled nozzle 20mm, 60° push-fit custom detail overlap nozzle - used between two thermoplastic sheets of material
107.129	Wide slot nozzle 60mm push-fit custom detail overlap nozzle - used between two thermoplastic sheets of material - typically used on Modified Bitumen roofing materials
107.130	Wide slot nozzle 40mm, 60° bent push-fit custom detail overlap nozzle - used between two thermoplastic sheets of material
107.131	Wide slot nozzle 80mm push-fit custom detail overlap nozzle - used between two thermoplastic sheets of material - typically used on Modified Bitumen roofing materials
107.132	Wide slot nozzle 40mm push-fit - overlap nozzle - used between two thermoplastic sheets of material (our most popular nozzle)
107.133	Wide slot nozzle 40mm, perforated push-fit overlap nozzle - used between two thermoplastic sheets of material - the perforated vents help to pre-heat the sheet for easier overlap welding
106.975	40mm silicon roller from Leister - sealed bearings for long life
AS-22C	40mm silicon roller from Everhard
106.976	28mm (PTFE) pressure roller

MARK YOUR
CALENDARS
for these special events!

Long Beach
Convention Center
July 17-19, 2008

SGIA 08 Booth 2119
October 15-18
Atlanta, GA

Pack Expo Booth TBA
November 9-13
Chicago, IL

TOP | HOME | BACK

Link to LEISTER Industrial Heat Sources and Blowers

Copyright © 1996 - 2008 Assembly Supplies, Co. 1250 Pacific Oaks Place #104 Escondido, CA 92029
Tel (800) 694-1472 - Fax (888) 694-4275
For questions or comments e-mail us: info@hotairtools.com

Equipment manufactured in Switzerland by
LEISTER Process Technologies
Galileostrasse 10 - 6056 Kaegiswil - Switzerland
Tel. +41-41-660 00 77 Fax +41-41-660 78 16
e-mail: Leister@leister.com, or visit their site on the web: http://www.leister.com
Last modified: 04/28/08