Fusion 3C Hand held extruder - Discover how easy an extruder can be!

Clever and smart: Despite its simple and symmetrical construction, the FUSION 3C hand extruder achieves an output of up to 3.8 kg/h. A single warm air blower is sufficient for heating the plastic filler and preheated air.

• Compact and handy
• Integrated electronics for stepless adjustment of the preheating temperature and output quantity
• Electronic drive protection
• Revolvable welding shoe
• Twist-free welding rod feed for 3 mm or 4 mm rod

Technical Data            FUSION 3C
	Model Screw extruder with on board preheat hot air blower
Voltage	V ~	230
Power consumption	W	3350
Frequency	Hz	50/60
Power	A	16
Output HDPE	lb/h	5.5 - 8.4
Output HDPE	kg/h	2.5-3.8
Welding Rod	Æ mm	3 or 4
Material		PE / PP
Size	L x W x H mm	670 x 90 x 180 w/o welding shoe
Weight	lb	15.8 w/o cord
Weight	kg	7.2 w/o cord

Click to download an Adobe Acrobat reader
PDF files for the Fusion 3C

Parts explosion - Not available yet from the factory

PDF Operating Manual for the /Fusion