The Hot Jet S is used with a 5mm round nozzle and tacking tip - As the nozzle is drawn along, hot air softens the plastic below the heel of the nozzle and the toe draws the softened material together.

Part # Description Illustration 107.144 5mm round "pencil tip" nozzle 106.996 Tacking nozzle     106.989 Speed welding nozzle 3mm push-fit on tubular nozzle ø 5mm 106.990 Speed welding nozzle 4mm push-fit on tubular nozzle ø 5mm 106.991 Speed welding nozzle 5mm push-fit on tubular nozzle ø 5mm 106.992 5.7mm profile speed welding nozzle 106.993 7mm profile speed welding nozzle 106.997 Rotary Burr

Click here to join our newsletter

MARK YOUR
CALENDARS
for these special events!

WSRCA Trade Show
See the new Varimat V2 in the following booths
Booth #'s 603, 605, 607, 609, Island C, Island J

Booth #TBA
SGIA
Las Vegas Conv. Center
October 13-15 2010

Booth #TBA
Pack Expo 2010
Chicago IL
October 31- November 3 2010

TOP | HOME  | BACK
 
Link to LEISTER Industrial Heat Sources and Blowers

Copyright © 1996 - 2010 Assembly Supplies, Co. 1250 Pacific Oaks Place #104 Escondido, CA  92029
Tel (800) 694-1472 - Fax (888) 694-4275
For questions or comments e-mail us: info@hotairtools.com
 
Equipment manufactured in Switzerland by
LEISTER Process Technologies
Galileostrasse 10 - 6056 Kaegiswil - Switzerland
Tel. +41-41-660 00 77 Fax +41-41-660 78 16
e-mail: Leister@leister.com, or visit their site on the web: http://www.leister.com
Last modified: 04/15/10